Cisco PowerKEY CableCARD Module 802 Guida Utente
Configure the DNCS for CableCARD and M-Card Support
4021652 Rev B
19
Verifying Installation of the CableCARD or M-Card Module
1 Connect your SSC DHCT device to the headend, or insert a CableCARD or
M-Card module into the CableCARD module slot on a host device at your
headend.
headend.
2 If your host is a device with RF output, tune the TV to the channel (3 or 4) that
you selected in the Configure CableCARD Server Window.
Note: If the host device is a television set, tune to any channel.
Note: If the host device is a television set, tune to any channel.
3 Verify that the MMI message displayed on the television screen includes the
telephone number that is in the CableCARD Server Configuration user interface.
Important: If the CableCARD or M-Card module is already bound to the host,
the MMI message will not appear on the TV.
Notes:
Important: If the CableCARD or M-Card module is already bound to the host,
the MMI message will not appear on the TV.
Notes:
This message appears automatically on one-way hosts within a few minutes
after inserting the CableCARD or M-Card module into the host.
after inserting the CableCARD or M-Card module into the host.
This message appears automatically on two-way hosts within a few minutes
after inserting the M-Card module into the host if the Display MMI for bi-
directional device option is selected in the Set CableCARD MMI Copy
Protection screen.
after inserting the M-Card module into the host if the Display MMI for bi-
directional device option is selected in the Set CableCARD MMI Copy
Protection screen.
This message contains the information defined in the MMI CP screen for
hosts with M-Card modules
hosts with M-Card modules
This message contains the phone number defined in the CableCARD Server
Configuration screen for hosts with CableCARD modules
Configuration screen for hosts with CableCARD modules
4 Is all of the displayed information correct?
If yes, the CableCARD or M-Card module is configured correctly.
If no, remove and reinsert the CableCARD or M-Card module. If the
displayed information is still incorrect, contact your service provider for
assistance.
displayed information is still incorrect, contact your service provider for
assistance.
5 After the CableCARD or M-Card module has been in the host device for several
minutes, verify that the host displays the correct channel map for the hub to
which the host device is connected.
Notes:
which the host device is connected.
Notes:
If no packages containing encrypted programs have been assigned to this
CableCARD or M-Card, then only analog and clear digital programs will be
viewable on the host device.
CableCARD or M-Card, then only analog and clear digital programs will be
viewable on the host device.
If packages containing encrypted programs have been selected for the
CableCARD or M-Card module, then encrypted programs should be
viewable. If the encrypted programs are also copy protected, then the
CableCARD or M-Card and the respective host must be granted Copy
Protection authorization prior to viewing the copy-protected programs.
CableCARD or M-Card module, then encrypted programs should be
viewable. If the encrypted programs are also copy protected, then the
CableCARD or M-Card and the respective host must be granted Copy
Protection authorization prior to viewing the copy-protected programs.