Cisco Multi-Stream CableCARD Module Guida All'Installazione
Appendix D
Post Installation Checks
92
78-4017672-01 Rev E
PCG System Checks
Verifying ECMs to Ensure PCGs are Incrementing
Complete the following steps to verify ECMs if sessions have already been built on
the system.
1 From an xterm window on the ISDS, log into the PCG using root username:
the system.
1 From an xterm window on the ISDS, log into the PCG using root username:
ssh root@[pcg name]
Note: Replace [pcg name] with the name of the PCG.
Note: Replace [pcg name] with the name of the PCG.
2 Type cd /opt/pcg/cons* and press Enter.
3 Type ./cons and press Enter to invoke the console software. The following
3 Type ./cons and press Enter to invoke the console software. The following
response appears:
Console S W Version: I . 0,d
shmid console 622593
~ ubimr of pcg+ c o spr ocesses currently urtached = 1
shtnstats.shr~l_nattch= 1
console shmuddr Oxh 7Jba000
Number ofpcg+console processes currently attached = 2
Number ofpcg+console processes currently attached = 2
Pcgprocid = 29122
Console procid = 1 1 652
4 Type ecms and press Enter.
5 Record the ECM count for the sessions: ___________ .
6 Wait five seconds; then type ecms and press Enter.
7 Verify that the ECM count for the sessions are incrementing.
8 Type exit and press Enter to exit from the PCG console. The PCG command line
5 Record the ECM count for the sessions: ___________ .
6 Wait five seconds; then type ecms and press Enter.
7 Verify that the ECM count for the sessions are incrementing.
8 Type exit and press Enter to exit from the PCG console. The PCG command line
returns.
9 Type exit and press Enter to log out of the PCG. The ISDS command line returns.
Reboot Set-Top
Complete the following steps to verify that video can be seen if sources have been
configured for encrypted or clear services.
1 Reboot a set-top provisioned on your network.
configured for encrypted or clear services.
1 Reboot a set-top provisioned on your network.