Cisco Multi-Stream CableCARD Module Guida All'Installazione
Chapter 6 Monitor and Troubleshoot the PCG API
52
78-4017672-01 Rev E
Command
Description
rpcflowcnts
Displays the RPC transaction counts. These counts indicate how
many remote procedure calls have transpired between the ISDS
and the PCG
many remote procedure calls have transpired between the ISDS
and the PCG
edgeinfo
Provides details on all the sessions (session number, program
number, transport stream ID, session state — active/pending
sessions — on all the different edge devices and scramblers.
number, transport stream ID, session state — active/pending
sessions — on all the different edge devices and scramblers.
An edge device is basically a QAM. The PCG communicates with a
device that has a simulCrypt synchronizer in it (or a scrambler).
Further multiplexing (MUX) and modulation could be within this
scrambler or external to it. The D9638 has all of this functionality
built into it
device that has a simulCrypt synchronizer in it (or a scrambler).
Further multiplexing (MUX) and modulation could be within this
scrambler or external to it. The D9638 has all of this functionality
built into it
softreset
Issues a soft reset of the PCG. This action does not power off the
PCG, but it restarts the PCG with current software and a provision
request is issued again to the ISDS
PCG, but it restarts the PCG with current software and a provision
request is issued again to the ISDS
stop
Issues the stop command for the PCG. (This command is the same
as the quit command)
as the quit command)
supercasid
Displays the current SuperCASId as provisioned by the ISDS.
Every conditional access system has a unique number referred to as
the SuperCASId. Our SuperCASId is 0xE000000.
Every conditional access system has a unique number referred to as
the SuperCASId. Our SuperCASId is 0xE000000.
If the SuperCASId in the D9638 is different from the value on the
ISDS provision page, then the technician can troubleshoot using
this command
ISDS provision page, then the technician can troubleshoot using
this command
threads
Display threads within the PCG
uptime
Displays the PCG uptime. Indicates whether the PCG has self-
rebooted after the initial setup
rebooted after the initial setup
vers
Issues a version command for the PCG. The version of the PCG
software is displayed
software is displayed