Cisco PowerKEY CableCARD Module 802 Guida All'Installazione

 

40 

4034718 Rev B 

Complete the procedures in this section for each PKES server to be upgraded. 

Important:  Note these important points: 

 

A keyboard and monitor must be connected to the PKES server before beginning 
the upgrade of the PKES platform software. 

 

The PKES MSK file is required to complete the upgrade of the PKES platform 
software. This file should be onsite prior to beginning these upgrade procedures. 

 

Before you begin, obtain the expected platform version of the PKES from your Cisco 
account manager. Then, complete the following steps to determine the current PKES 
platform software version. 
1  From an xterm window on the ISDS, type ssh root@[PKES_IP] and then press 

Enter. 
Note:  Substitute the IP address of the PKES server for [PKES_IP]. 
Important:  The root password is not included in these procedures. If you need 
the root password, contact Cisco Services. 

2  Type rpm -qi SAIlxplat and then press Enter to obtain the current version of the 

PKES platform software. 
Example:  The following example illustrates Version 1.0.4 of the PKES platform 
software. 

Name 

SAIxplat 

Relocations:  (not 
relocatable) 

Version 

1.0.4 

Vendor:  Cisco Systems, Inc. 

Release 

1 

Build Date: Tue 12 May 2009 
10:32:21 AM EDT 

Install 
Date 

Tue 16 Jun 2009 
04:30:53 AM EDT       

Build Host: 
sausatlpcg01.dvsg.sciatl.com 

Group 

System 
Environment/Base        

Source RPM: SAIlxplat-1.0.4-
1.src.rpm 

Size 

0 

License: Proprietary 

Signature (none) 

 

Packager  SPVTG 

 

Summary 

SAI Linux Platform Package (RHEL 5.1) 

Descripti
on 

The base platform for Linux based products. 
This rpm is used to track the platform release 
version.