Cisco Cisco D9824 Advanced Multi Decryption Receiver Guida All'Installazione

 

10 

OL-29015-01 

1  Press MENU to display the Main menu.  
2  Press   to go to the Setup menu. Press SELECT. Press 



to move to the TS Input 

menu. Press SELECT.   

3  To setup the ASI input port, go to step 4. To setup the RF1 input port, go to step 

5. 

4  Press SELECT three times. Press   to set the ASI port to Act (Activate). Press 

SELECT. Go to step 11. 

5  Press SELECT. Press 



to go to RF1. Press SELECT twice. Use   to set the RF1 

port parameter to Act (Activate). Press SELECT.   

6  Press 



to move to the LO1, LO2, Crossover menu. Verify these parameters for 

your application. If no change is needed, go to Step 7.  If required, you may 
modify these settings. Use 



to move to the parameter that you want to modify. 

Press SELECT. Use the numerical keypad to enter new frequencies. Press 
SELECT.   

7  Press 



five times to move to the Modulation and Rolloff menu.  Press SELECT. 

Use     to choose DVB-S or DVB-S2. Press SELECT. If DVB-S2 is used, press 



to 

choose Rolloff. Press SELECT. Use     to choose the value. Press SELECT.   

8  Press   to move to the Freq., Sym Rate, and FEC menu. Press SELECT.  Enter the 

RF frequency. Press SELECT. Press 



to move to the Sym. Rate menu. Press 

SELECT. Enter the symbol rate. Press SELECT. If DVB-S2 is used, proceed to 
step 9. If DVB-S is used, press 



to set up the FEC. Press SELECT. Use   



to 

select AUTO. Press SELECT.   

9  Press   twice to move to the Net ID menu. Press   to choose Net ID. Press 

SELECT. Enter the value. Press SELECT.   

10  Press  . Press SELECT. Use     to change the LNB power, if needed. Only the 

RF1 port is capable of providing 13V or 18V. Press SELECT.   

11  Press MENU three times to acquire the network. The receiver will search for the 

signal and display “Acquisition Successful”. It will find the first available 
channel on the network. 

12  Press 



to move to Save & Exit. Press SELECT. Save & Exit will return you to the 

Main: Setup menu; Abandon & Exit will go back to the last menu accessed with 
the original parameters; Cancel will go back to the last menu accessed with 
changes saved.   

13  If the front LED is solid green, the unit is authorized. Proceed with Assigning a 

Program Channel to a PE (Program Entry). If the front LED is flashing green, the 
unit is unauthorized. Please contact your service provider and provide the 
Tracking ID number for authorization. The Tracking ID can be found on the 
ABOUT menu. To locate the Tracking ID, press MENU, press 



twice, and then 

press SELECT twice. Make a note of the Tracking ID number. Press MENU three 
times to return to the startup screen.