Cisco Cisco D9804 Multiple Transport Receiver Guida All'Installazione
Chapter 5 Setup and Monitoring
96
78-4042990-01 Rev B
Tab Pages
The GUI of the D9804 MTR has a number of tab pages.
The function for the tab pages is as follows:
Summary
From this page you can obtain an overview of the D9804 MTR operation.
From this page you can obtain an overview of the D9804 MTR operation.
Status
From this page you can view detailed input status, the output stream status,
alarms and warnings, and inband control status.
From this page you can view detailed input status, the output stream status,
alarms and warnings, and inband control status.
Setup
From this page you can:
From this page you can:
-
enter the inband control network identification number,
-
configure the RF and ASI inputs,
-
enable and route the ASI outputs,
-
set the RF muting thresholds,
-
configure the telemetry (RS-232 data) outputs,
-
configure user settings.
System
From this page you can:
From this page you can:
-
set up alarms,
-
view alarm history and status information,
-
viewing and setting up backup restore control,
-
configure ethernet ports,
-
read various system parameters such as the serial number, software version
number, system uptime, and temperatures,
number, system uptime, and temperatures,
-
configure trap destinations for SNMP,
-
set up warning messages.
Diagnostics
From this page you can view carrier and transport information, flush inband
tables and clear the ADP counters.
From this page you can view carrier and transport information, flush inband
tables and clear the ADP counters.