Cisco Cisco D9804 Multiple Transport Receiver Guida All'Installazione
About the Front Panel
78-4042990-01 Rev B
27
SIGNAL
Green
Solid indicates all of the following conditions:
all RF inputs are enabled, all inputs are
locked to a signal, and are not muted.
locked to a signal, and are not muted.
all routed ASI outputs are operating
without an error.
without an error.
Green
Flashing indicates one of the following
conditions:
conditions:
difficulty with an input, route or output.
one or more RF inputs, or the ASI input
are not synchronized.
are not synchronized.
one or more ASI outputs are routed, but
muted by a fault condition.
muted by a fault condition.
no RF signal is present or detected, or it
is muted.
is muted.
Off
Off indicates all of the following conditions:
no RF input signal is available, enabled
or detected, or the input is muted.
or detected, or the input is muted.
no ASI input is present.
no valid inputs are available.
Navigation/Selection Keypad
The navigation keys (LEFT, RIGHT, UP and DOWN) and the SELECT key are the
primary controllers. Each navigation key performs various functions, depending on
the current state of the menu system (i.e., sometimes the left navigation key
backspaces over an entry and sometimes moves the cursor to a different menu item).
Once the cursor is over the desired function, pressing the SELECT (center key) or
DOWN Arrow key selects the current item (this may go to a different menu or
change a setting). Pressing the SELECT key stores any entered values.
primary controllers. Each navigation key performs various functions, depending on
the current state of the menu system (i.e., sometimes the left navigation key
backspaces over an entry and sometimes moves the cursor to a different menu item).
Once the cursor is over the desired function, pressing the SELECT (center key) or
DOWN Arrow key selects the current item (this may go to a different menu or
change a setting). Pressing the SELECT key stores any entered values.