Cisco Cisco D9804 Multiple Transport Receiver Guida All'Installazione
Setup Menu
78-4042990-01 Rev B
55
Setup: Tuning
To view the Tuning menu from the Main menu, press the RIGHT arrow key once
and then the SELECT key to reach the Setup Menu. Then press the RIGHT arrow
key twice and the SELECT key to view the Tuning menu.
and then the SELECT key to reach the Setup Menu. Then press the RIGHT arrow
key twice and the SELECT key to view the Tuning menu.
For instructions on how to select and store settings, see About the Front Panel (on
page 26).
page 26).
The Tuning menu has the following structure:
Menu Item
Description
Parameters
In
Select the RF input port numbers or
ASI input.
ASI input.
Select RF1, RF2, RF3 or RF4
The ASI input is configured
separately.
separately.
Enabled
Enables or disables the selected
input port.
input port.
Yes - the input port is enabled.
No - the input port is disabled.
InBand
Selects whether to use Inband data
or local data for RF tuning.
or local data for RF tuning.
Apply - the tuning will change as
needed to follow the NIT transmitted
by the uplink.
needed to follow the NIT transmitted
by the uplink.
Ignore - the tuning does not follow
changes in the NIT transmitted by the
uplink.
changes in the NIT transmitted by the
uplink.