Cisco Cisco Content Delivery Engine 250 Guida All'Installazione

2.4.2 Validation on CDS-TV

Verify the IPMI FW using the following command:

CDE250_Streamer# cat /sys/devices/platform/ipmi_bmc.aabb.32/firmware_revision
This should return “3.3”

Note: Linux will usually strip the “0” from the 3.03 string.

Execute the “sdt” CLI command. Verify this command does not hang (example output is
shown below):

CDE250_Streamer# sdt

*****************************************************************************
Supero Doctor II - Linux version 2.79(110504)
Copyright(c) 1993-2010 by Super Micro Computer, Inc. http://supermicro.com/
*****************************************************************************
Monitored Item High Limit Low Limit Status
----------------------------------------------------------------------
Fan1 Fan Speed 715 5625
Fan2 Fan Speed      715 5625
Fan7 Fan Speed 715 5625
CPU1 Vcore Voltage 1.49 0.60 0.98
CPU2 Vcore Voltage 1.49 0.60 0.98
CPU1 VTT Voltage 1.34 0.92 1.12
CPU2 VTT Voltage 1.65 0.92 1.13
CPU1 DIMM Voltage 1.65 1.20 1.52
CPU2 DIMM Voltage 1.65 1.20 1.52
+1.5V Voltage 1.65 1.35 1.46
+1.8V Voltage 1.98 1.62 1.80
+5V Voltage 5.50 4.51 4.90
+12V Voltage 13.19 10.80 12.23
+1.1V Voltage 1.21 0.98 1.10
+3.3V Voltage    3.65 2.95 3.29
+3.3Vsb Voltage 3.65 2.95 3.26
VBAT Voltage 3.65 2.95 3.02
CPU1 Temperature 95/203 Low
CPU2 Temperature 95/203       Low
System Temperature 75/167 31/87
Chassis Intrusion Good
Power Supply Failure Good
Power1 Supply Failure N/A Warning!
Power2 Supply Failure N/A Warning!
--------------------------------------------- Wed Mar 6 16:31:31 2013