Cisco Cisco Content Delivery Engine 250 Guida All'Installazione
2 IPMI Firmware Upgrade Process
Please follow the process below in order to upgrade the IPMI motherboard firmware to v2.05.
1) FreeDOS USB Boot stick creation procedure
1) FreeDOS USB Boot stick creation procedure
a) Insert a blank USB memory stick into your Windows based PC
b) Download and save the “rufus” USB boot device creator from the following URL:
b) Download and save the “rufus” USB boot device creator from the following URL:
c) Start rufus by opening the “rufus_vx.x.x.exe” file. (note: this document was created using
rufus v1.2.0.183)
d) Insert a USB stick to be formatted with FreeDOS
e) Select the “Device” to use as the FreeDOS boot device
f) File system: “FAT32”
g) Enter a “New volume label”, i.e. IPMIUP
h) Select “Quick Format”
i) Select Create a bootable disk using: “FreeDOS”
j) Click on “Start”, the Boot stick format should proceed
e) Select the “Device” to use as the FreeDOS boot device
f) File system: “FAT32”
g) Enter a “New volume label”, i.e. IPMIUP
h) Select “Quick Format”
i) Select Create a bootable disk using: “FreeDOS”
j) Click on “Start”, the Boot stick format should proceed
Figure 1: Screenshot of the Rufus utility