Cisco Cisco Compact EGC Segmentable Node A90200 Guida All'Installazione
Introduction
1-3
Overview
Product Overview
The Reverse Optical Transmitter is a 5 – 300 MHz return path transmitter which
plugs into many types of Node, like EGC FFDN and EGC Segmentation family, used
for transmitting reverse signals from the node back to the headend. The transmitter
features thermal compensation such that the drive level to the laser is held relatively
stable over the full operating temperature range.
The main functionality of the transmitter will be to convert the RF upstream signal
into an optical signal. The optical signal will be AM-modulated with RF signal. The
module will also be capable of generating a 5MHz pilot tone. The Reverse
Transmitter is available with Fabry-Perot, DFB or CWDM lasers.
Electrical connections are made to the node via the interface connection pins. Signals
on this connector include +24V and +5V powering, RF input, ground and optical test
point monitor. The transmitter is mounted to the node using a mounting screw on
the heat sink.
The optical reverse transmitters are to be compatible with the following nodes.
plugs into many types of Node, like EGC FFDN and EGC Segmentation family, used
for transmitting reverse signals from the node back to the headend. The transmitter
features thermal compensation such that the drive level to the laser is held relatively
stable over the full operating temperature range.
The main functionality of the transmitter will be to convert the RF upstream signal
into an optical signal. The optical signal will be AM-modulated with RF signal. The
module will also be capable of generating a 5MHz pilot tone. The Reverse
Transmitter is available with Fabry-Perot, DFB or CWDM lasers.
Electrical connections are made to the node via the interface connection pins. Signals
on this connector include +24V and +5V powering, RF input, ground and optical test
point monitor. The transmitter is mounted to the node using a mounting screw on
the heat sink.
The optical reverse transmitters are to be compatible with the following nodes.
A90201 Compact GaN EGC Segmentable node
A90200 Compact EGC Segmentable node
A90100 Compact EGC Fiber deep node
A90300 Compact EGC Outdoor Fiber deep node