Cisco Headend System Release 2.5
3-6
Enabling CVT Downloads on the DNCS
738185 Rev B
Confirm That All DNCS Processes Are Running,
Continued
11. Type y and press Enter.
12. Type x and press Enter to return to the Dncs Control window.
13. Are there any other processes that need to be started?
12. Type x and press Enter to return to the Dncs Control window.
13. Are there any other processes that need to be started?
•
If yes, repeat steps 7 through 12.
•
If no, go to step 14.
14. Type x and press Enter until you return to the $ prompt.
15. At the $ prompt, type exit and press Enter.
16. Do all distributed BFS QAMs use the same frequency and modulation as the
15. At the $ prompt, type exit and press Enter.
16. Do all distributed BFS QAMs use the same frequency and modulation as the
primary or local BFS QAM?
•
•
If yes, go to step 17.
•
If no, you must use the OSM Automux configuration. Go to Add OSM
Entries to the DNCS .profile File, next in this chapter.
17. Do all BFS QAMs, including the primary BFS QAM, use the same program
number for the OSM session?
•
•
If yes, you do not need the OSM Automux configuration. Go to Test the
Distributed BFS Configuration, later in this chapter.
•
If no, you must use the OSM Automux configuration. Go to Add OSM
Entries to the DNCS .profile File, next in this chapter.