Cisco Headend System Release 2.5
738185 Rev B
Disabling OSM Automux
4-1
Chapter 4
Disabling OSM Automux
Overview
Introduction
This chapter contains the instructions for disabling OSM Automux only. For
example, if you move from a non-overlapping configuration to an overlapping
configuration, you may want to disable OSM Automux.
If you are using OSM Automux and you want to remove the entire distributed BFS
If you are using OSM Automux and you want to remove the entire distributed BFS
configuration from your system, you must complete this chapter and then go to
Chapter 5 to complete the removal process.
Before You Begin
Your first step to disable OSM Automux is to confirm that all DNCS processes are
running. See the Confirm That All DNCS Processes Are Running section in
Chapter 3 of this guide for the procedure.
In This Chapter
This chapter contains the following topics.
Topic
See Page