Cisco Cisco Digital Service Access Node (DSAN) 8210 Guida All'Installazione
Chapter 4 CLI Diagnostics
112
78-4041038-01 Rev B
Field Name
Description
Source ID
Details channel source ID specified in the SCTE-18 message
Maj:Min Ch
Major and Minor channel numbers for the force tune
details channel
details channel
Note: This applies only to In-Band EAS, which is not used
in the DSAN 8210. These will report as 0.
in the DSAN 8210. These will report as 0.
Exception Channels
List of channels excluded from the force tune specified in
the SCTE-18 message. These are in the form of:
the SCTE-18 message. These are in the form of:
Source ID:Major Channel:Minor Channel
Note: In the DSAN 8210, only Source ID is populated for
out-of-band EAS messages. Major and minor channel
numbers will report as 0.
out-of-band EAS messages. Major and minor channel
numbers will report as 0.
Basic Navigation
From this screen, you can:
Press Enter to redraw the screen and update its information.
Type p and then press Enter to go to the Page 13.0 diagnostic screen.
Type n and then press Enter to redraw the screen and update its information.
Type x and then press Enter to exit and return to the DSAN> prompt.
At the >>> prompt, type any screen number decimal format (e.g., 3.0) and then
press Enter to go directly to that screen.
press Enter to go directly to that screen.