Cisco Headend System Release 2.5 Guida All'Installazione
2-16
SR 2.5 and SR 3.5 Upgrade Procedures
78-738190-01 Rev B
for the Enterprise 450 and Sun Fire V880 DNCS
Detach Database Mirrors,
Continued
10. Type lustatus and then press Enter.
Result: The system displays the status of the LiveUpgrade boot environment.
Example: You should see results similar to this example:
Example: You should see results similar to this example:
BE_name Complete Active ActiveOnReboot CopyStatus
---------------------------------------------------------------------------------------------------
SR_2.2 yes yes no -
SR_2.5 yes no yes -
Note: This example shows that the SR 2.5 environment will be active upon
the next reboot.
11. Do the results from step 10 show that the SR 2.5 environment is active on
reboot?
•
•
If yes, continue with step 12.
•
If no, contact Cisco Services.
12. Follow these instructions to eject the DBDS Maintenance CD.
a) Type cd / and then press Enter.
b) Type eject cdrom and then press Enter.
b) Type eject cdrom and then press Enter.
13. Type /usr/sbin/shutdown –y –g0 –i6 and then press Enter.
Result: The DNCS reboots several times.
Note: After the final reboot, the new boot environment contains SR 2.5 or SR
Note: After the final reboot, the new boot environment contains SR 2.5 or SR
3.5.
14. Log on to the DNCS as dncs user.
15. Go to Install the DNCS Patch, next in this chapter.
15. Go to Install the DNCS Patch, next in this chapter.