Cisco Headend System Release 2.5 Guida All'Installazione
A-4
The siteCmd Program
78-4003191-01 Rev B
Set Up the Remote Site,
Continued
6. Type y (for yes) and then press Enter.
Results:
•
•
The system performs a connectivity check between the RNCS and the
DNCS.
•
The system sets up the RNCS with the required configuration so that a
Secure Shell can be used for communications between the DNCS and the
RNCS.
•
The system creates a synchronization directory for the RNCS in the
DNCS (/dvs/distFiles/[host name]).
Example: In the example used in this procedure, the siteCmd program
Example: In the example used in this procedure, the siteCmd program
creates the following directory on the DNCS:
/dvs/distFiles/site1.
7. Verify that a secure connection exists by typing siteCmd [hostname] ls -l
and then press Enter.
Note: Substitute the hostname of the remote site for [hostname].
Result: The system should display the hostname and site ID of the remote
Note: Substitute the hostname of the remote site for [hostname].
Result: The system should display the hostname and site ID of the remote
site, as well as a listing of the files in the directory of the remote site.
8. Did the system display the results described in step 7?
•
If yes, type exit and then press Enter to log out the root user.
•
If no, contact Cisco Services for assistance.