Cisco Headend System Release 2.7
Decide Binding Type
736107 Rev D
29
RF Output—Select the channel to which the CableCARD module outputs
video. Typically, you should select the same channel that the DHCTs use for
the CableCARD modules.
Card Authorization Phone Number—Enter the telephone number that
subscribers call to verify that their CableCARD module was authorized. You
can enter up to 20 alphanumeric characters, including spaces, in this field.
5 Click Save CableCARD Server Configuration on the left side of the screen to
save these parameters.
6 Are you using SR 4.2 or later?
If yes, go to step 7.
If no, follow the instructions in Configuring System Release 4.0 to Support the
Copy Protection Man-Machine Interface Screen (part number 736123) on how to
implement the changes in steps 7 through 9 of this procedure. Then, go to
step 10.
7 Click MMI Screen Format. The Configure Copy Protection MMI Screen opens.
Example: The following illustration is an example of a Set CableCARD MMI
Copy Protection screen from SR 4.2.1. Screens in previous System Releases might
look different.
8 Make sure that the Display MMI for bi-directional device is activated (that a
checkmark displays in the box).