Cisco Headend System Release 2.5
Appendix C
Direct ASI Installation and Configuration Procedures
118
4004148 Rev C
3 Follow these instructions to configure the Set Up MPEG Source window.
a Click the arrow next to the Headend Name field and choose the appropriate
headend.
b Type ASI_BFS in the MPEG Source Name field.
c Type ASI in the Device Type field.
c Type ASI in the Device Type field.
Note: If ASI is already configured, you can click the arrow next to the Device
Type field and select ASI.
Type field and select ASI.
d Type any IP address and MAC address in the IP Address and Physical
Address fields.
Note: The actual IP address and MAC address you use are not important.
e Click Save. The Connectivity tab becomes active.
4 Click the Connectivity tab on the Set Up MPEG Source window.
5 Click Create Port. The Port Number Prompt window opens.
5 Click Create Port. The Port Number Prompt window opens.