Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Scheda Tecnica
_________________________________________________________________________________________________________________
Page 12 of 15
Ordering Information
The GS7000 Node is available in a wide variety of configurations. The GS7000 Ordering Matrix provides ordering
information for configured node stations. This page contains ordering information for required and optional
accessories. Please consult with your Account Representative, Customer Service Representative, or
Applications Engineer to determine the best configuration for your particular application.
information for configured node stations. This page contains ordering information for required and optional
accessories. Please consult with your Account Representative, Customer Service Representative, or
Applications Engineer to determine the best configuration for your particular application.
Required Accessories
Part Number
Plug-in Pads (attenuators) – Available in 0.5 dB steps from 0 to 20 dB
1 required for each Optical Receiver Module installed in the node (for Optical Interface Board)
1 required for each Optical Receiver Module installed in the node (for Optical Interface Board)
1 required for each Optical Transmitter Module installed in the node (for Optical Interface Board)
1 required for each Reverse input path activated (for Launch Amplifier)
589693 (0 dB)
sequentially thru
589734 (20.5dB)
Optional Accessories
Part Number
Plug-in Forward Linear Equalizers – Available in 1.5 dB steps from 0 to 21 dB.
Node shipped with 7.5 dB Linear Equalizers (2)* installed for 14.5dB of tilt to 1002 MHz (*4008782)
Node shipped with 7.5 dB Linear Equalizers (2)* installed for 14.5dB of tilt to 1002 MHz (*4008782)
4007228 (0 dB)
see table below
Plug-in Signal Directors – 2 required
Node shipped with Jumpers installed to activate 4 RF output ports
Optional 2-Way Splitters are required to activate 5 or 6 RF output ports
Node shipped with Jumpers installed to activate 4 RF output ports
Optional 2-Way Splitters are required to activate 5 or 6 RF output ports
4011907
4011908
Note: Configured nodes ship without reverse input pads and any of the pads on the OIB. All other standard accessories are shipped from the
factory. Forward Launch Amp attenuator pads, (2) 7.5 dB linear Eqs, and (2) signal director jumpers are shipped with every configured node.
factory. Forward Launch Amp attenuator pads, (2) 7.5 dB linear Eqs, and (2) signal director jumpers are shipped with every configured node.
GS7000 Forward Launch Amplifiers
Part Number
Node Launch Amplifier, 2-way forward segmentation, 55/70 MHz split
4014384
GS7000 Forward Configuration Modules
Forward Configuration Module, 1x2
4011900
Forward Configuration Module, 1x2 Redundant
4011901
Forward Configuration Module, 2x2
4011902
Forward Configuration Module, 2x2 Redundant
4011903
Forward Configuration Module, 1x2, Forward RF Injection, Redundant
4017858
Forward Linear Equalizers
0 dB 1GHz Forward Linear EQ
4007228
1.5 dB 1GHz Forward Linear EQ
4008778
3.0 dB 1GHz Forward Linear EQ
4008779
4.5 dB 1GHz Forward Linear EQ
4008780
6.0 dB 1GHz Forward Linear EQ
4008781
7.5 dB 1GHz Forward Linear EQ
4008782
9.0 dB 1GHz Forward Linear EQ
4008783
10.5 dB 1GHz Forward Linear EQ
4008784
12.0 dB 1GHz Forward Linear EQ
4008785
13.5 dB 1GHz Forward Linear EQ
4008786
15.0 dB 1GHz Forward Linear EQ
4008787
16.5 dB 1GHz Forward Linear EQ
4019258
18.0 dB 1GHz Forward Linear EQ
4019259
19.5 dB 1GHz Forward Linear EQ
4019260
21.0 dB 1GHz Forward Linear EQ
4019261
GS7000 Node Signal Directors
Node Signal Director Jumper
4011907
Node Signal Director Splitter
4011908
GS7000 Forward Low Current Optical Receivers
Optical Receiver, SCA connector
4013593
Optical Receiver, SCU connector
4013594
Optical Receiver, FCA connector
4013595
GS7000 Forward Local Injection Module Kit
(does not include FCM)
Forward Local Injection Module
4013575