Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guida All'Installazione
Chapter 5 Using the Web Interface
58
4037424 Rev A
Copy is done via standard commands used on the system in question (e.g., under
Windows, use Ctrl-C to copy.)
Windows, use Ctrl-C to copy.)
The following example shows a typical set of Ping results.
Pinging from Cable Modem: pings 25; size 64 bytes; timeout 5 seconds
Pinging cms-pit.tollgrade.com ...
Reply from 172.16.0.11: bytes= 64 seq=0 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=1 time=0 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=2 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=3 time=0 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=4 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=5 time=0 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=6 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=7 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=8 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=9 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=10 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=11 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=12 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=13 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=14 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=15 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=16 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=17 time=0 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=18 time=0 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=19 time=0 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=20 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=21 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=22 time=10 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=23 time=0 ms TTL=62
Reply from 172.16.0.11: bytes= 64 seq=24 time=0 ms TTL=62
Ping statistics:
Pings sent: 25 (1 per second); Replies received: 25 (1 per second)
Bytes sent: 1600 (66 per second); Bytes received: 1600 (66 per second)
25 replies passed verification (0 failed)
Min time: 0 ms; Max time: 10 ms; Avg time: 6 ms; Total time: 24230 ms
Simultaneous Access
Access by more than one user is possible; however, only a single test can be run at a
time. When the ―Ping in use‖ message appears (see Controlling the Ping Test
above), no other test can be started. Through the use of a temporary cookie, only the
original user can abort an active test.
time. When the ―Ping in use‖ message appears (see Controlling the Ping Test
above), no other test can be started. Through the use of a temporary cookie, only the
original user can abort an active test.