Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guida All'Installazione
Installing the SM/LCM
4024769 Rev A
13
2 Carefully insert the SM/LCM into the node lid between the RCVR 1 and XMTR 1
positions as shown below.
CAUTION:
Do not use too much force when seating the module in the node. If too much
resistance is felt, remove the module and inspect the module electrical
Do not use too much force when seating the module in the node. If too much
resistance is felt, remove the module and inspect the module electrical
connector pins. Make sure that the pins are straight and level before re-
attempting installation.
attempting installation.