Cisco Headend System Release 2.5 Guida All'Installazione
Common Download
78-4036705-01 Rev D
119
10 Define the following parameters on the DTACS DTA Image Association screen.
Use one of the DTA images copied to the /dvs/dtacs/dtacsFiles/images
directory):
directory):
Field
Description
Image Name
Select the name of the image file you are associating from the drop-
down list.
down list.
Note: This is the only field that is editable after the association has
been created.
been created.
Vendor ID
Select the distributor of the image file from the drop-down list.
Example: Cisco is 0x223a.
Hardware ID
Select the correct hardware ID for the DTAs that will receive this
image.
image.
Example: For DTA30s, select 0x643.
Download
Command
Command
Select Immediate.
Note: This field only displays when you are adding or editing an
image association.
image association.
Notes:
Saving this Image Association should create a CVT file in the
/dvs/dtacs/pub directory on the DTACS Server. The DTACS server should
send this CVT information out every minute on the SI IP Stream to all the
DTACS PID Routes that are active. Sending the CVT every minute is the
default setting for the dtacsCvtMgr. This default is set using the variable
CVT_REPEAT_RATE in /dvs/dtacs/etc/cvtMgr.cfg.
/dvs/dtacs/pub directory on the DTACS Server. The DTACS server should
send this CVT information out every minute on the SI IP Stream to all the
DTACS PID Routes that are active. Sending the CVT every minute is the
default setting for the dtacsCvtMgr. This default is set using the variable
CVT_REPEAT_RATE in /dvs/dtacs/etc/cvtMgr.cfg.