Cisco Headend Digital Broadband Delivery System Guida All'Installazione
Examine and Re-Order the pddataqampat Table
4036631 Rev B
81
Recording and Re-Creating Out-of-Order Entries
In this procedure, you will delete session IDs greater than 22, and then recreate them
such that session ID 199 comes right after session ID 24.
Important: Pay special attention to step 4 of this procedure. Step 4 provides special
instructions regarding session ID 199.
1 On a sheet of paper, write down every entry in the Inband Data PAT window
such that session ID 199 comes right after session ID 24.
Important: Pay special attention to step 4 of this procedure. Step 4 provides special
instructions regarding session ID 199.
1 On a sheet of paper, write down every entry in the Inband Data PAT window
with a Session Number greater than 22.
Important: Be sure to record each field: Session MAC Address, Session
Number, Program Number, and PMT PID.
Important: Be sure to record each field: Session MAC Address, Session
Number, Program Number, and PMT PID.
2 Follow these instructions to delete each entry with a Session Number greater
than 22.
a Highlight an out-of-order entry and click Delete Entry. A confirmation
a Highlight an out-of-order entry and click Delete Entry. A confirmation
message appears.
b Click OK (to confirm the intention to delete). The system deletes the out-of-
order entry.
Note: Ignore any BFS restart messages that may appear. You will stop and
restart the BFS processes later in this section.
restart the BFS processes later in this section.
3 Click New Entry on the Inband Data PAT window. The BIG PAT Setup window
appears.
4 On the BIG PAT Setup window, type in Session MAC Address 00:00:00::00:00:00
and Session Number 199.
Note: The Program Number and PMT PID fields are already filled in. Use the
default data for these entries.
Important: For session ID 199, do not enter 77:77:77:77:77:77 as the Session MAC
Address. Instead, enter the session MAC address for the site, similar to what you
would do for any other session.
Note: The Program Number and PMT PID fields are already filled in. Use the
default data for these entries.
Important: For session ID 199, do not enter 77:77:77:77:77:77 as the Session MAC
Address. Instead, enter the session MAC address for the site, similar to what you
would do for any other session.
5 Click Save. The system saves the just-added entry in proper ascending order.
6 Repeat steps 3 through 5 for each out-of-order entry that you recorded on the
6 Repeat steps 3 through 5 for each out-of-order entry that you recorded on the
sheet of paper from step 1.
Note: When you have completed this procedure, all Program Numbers and
PMT PIDs will be in ascending order.
Note: When you have completed this procedure, all Program Numbers and
PMT PIDs will be in ascending order.