Cisco Headend System Release 2.7 Guida All'Installazione
Chapter 2 Activate SBE
18
740223 Rev F
7 Run the delete-sm command while staging is not being done:
..OOS.. > /dvs/dncs/tmp/deprovisioned10.out
Important: There must be a space before the first double dot (..), following the
Important: There must be a space before the first double dot (..), following the
second double dot (..), and before and after the > character.
Note: When staged, DHCTs are provisioned with packages to provide different
Note: When staged, DHCTs are provisioned with packages to provide different
levels of service. The delete-sm command de-provisions all OOS DHCTs so they
will be restaged when they are reprovisioned with packages.
8 Run the checkDIS.ksh -c command to obtain two counts from the database.
Note: It may take several minutes to receive count results.
9 Record the database count results on a sheet of paper.
Note: The desired result of these tasks is to have the two database counts match
or for the first number to be larger than the second number. You must contact the
representative who handles your account if this result has not occurred.
Important: Once you have completed this procedure, wait 7 days and then go to
Important: Once you have completed this procedure, wait 7 days and then go to
SBE Activation Last Day (Seventeen) (on page 19).