Cisco Headend System Release 2.5 Guida All'Installazione
Chapter 2 Upgrading the Software
14
4023372 Rev B
5 Type more mqamdata and press Enter. A result, similar to the following output,
appears.
6 Did more than one config file appear?
If yes, keep the xterm window open and go to step 7.
If no, go to Checking the Software Version Associated with the config File
(on page 15).
7 Do you need to continue to run different versions of MQAM software on some
MQAMs in your network?
If yes, refer to Load Multiple Versions of MQAM Code (on page 35).
If no, go to step 8.
8 Update the MQAMs to use the same config file by performing the following
steps:
a From the DNCS Administrative Console, click Element Provisioning and
a From the DNCS Administrative Console, click Element Provisioning and
click QAM. The QAM List window opens.
b Select the MQAM, click File and select Open. The Set Up MQAM window
opens.
c Click Advanced Parameters and modify the configuration file, as needed.
9 Go to
Checking the Software Version Associated with the config File
(on page 15).