Cisco Headend System Release 2.7 Guida All'Installazione
Add and Configure the RNCS
4022447 Rev B
39
RF Output TSID for BFS Port—Enter the RNCS BFS QAM output port.
PSI Interval—Enter 80.
Port—Select 0.
Bandwidth—Enter 38.80.
8 Click Save.
Setting Up the Remote Site
Complete the following steps for each RNCS site that your DNCS will manage.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
1 If necessary, open an xterm window on the DNCS.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 Type siteCmd -S and press Enter. The following message appears:
Enter the host name of the site you are adding.
4 Type the host name of the remote site you are registering and press Enter.
Example: site1
Result: The following message appears:
Result: The following message appears:
Enter the IP address of the site you are adding.
5 Type the IP address of the remote site you are registering and press Enter.
Example: 192.168.100.4
Result: The following message appears:
Result: The following message appears:
The following line will be added to /etc/hosts:
[IP address] [host name]
Do you want to continue? [y,n,?,q]
[IP address] [host name]
Do you want to continue? [y,n,?,q]
6 Type y (for yes) and press Enter.
Results:
The system performs a connectivity check between the RNCS and the DNCS.
The system sets up the RNCS with the required configuration so that a
Secure Shell can be used for communications between the DNCS and the
RNCS.
Secure Shell can be used for communications between the DNCS and the
RNCS.
The system creates a synchronization directory for the RNCS in the DNCS
(/dvs/distFiles/[host name]).
(/dvs/distFiles/[host name]).
Example: In the example used in this procedure, the siteCmd program creates
the following directory on the DNCS: /dvs/distFiles/site1.
the following directory on the DNCS: /dvs/distFiles/site1.