Cisco Headend System Release 2.7 Guida All'Installazione
Re-Creating the All Sites Sources
4022447 Rev B
57
Re-Creating the All Sites Sources
After you make sure that the RNCS is running properly, you must re-create the
original DNCS sources for All Sites for these sources to be available to the DNCS and
the RNCS.
original DNCS sources for All Sites for these sources to be available to the DNCS and
the RNCS.
Follow these instructions to re-create the All Sites sources.
1 On the DNCS Administrative console, click the Application Interface Modules
tab.
2 Click BFS Admin. The BFS Admin Sites window opens.
3 Select the entry that corresponds to All Sites and click File > Select. The Site BFS
3 Select the entry that corresponds to All Sites and click File > Select. The Site BFS
Administration window opens.
Note: The All Sites entry could be named All Sites, DNCS, or some other name.
Check your network map or with your network administrator if you are not sure
which site represents All Sites.
Note: The All Sites entry could be named All Sites, DNCS, or some other name.
Check your network map or with your network administrator if you are not sure
which site represents All Sites.
4 Click the Sources tab.
5 Click File > New.
6 Enter the following information based on the information you recorded before
5 Click File > New.
6 Enter the following information based on the information you recorded before
you installed the RNCS.
Source Name
Source ID
Source Type
Transport Type
Data Rate
Block Size
Indication Interval
Data Pump
Available Hosts
7 Click Add. The dncsatm host moves to the Selected Hosts column.
8 Click Save.
8 Click Save.