Cisco Headend Digital Broadband Delivery System Guida Utente
3-10
Channel Selection Options
4002178 Rev C
Select the Channel That the Set-Top Tunes to at Power On,
Continued
Selecting the Power On Behavior for Your Subscribers
If you want to select the power-on behavior for all of your subscribers, complete the
following steps.
Note: To allow subscribers to select the power on channel for the set-top, see
Note: To allow subscribers to select the power on channel for the set-top, see
Allowing Subscribers to Select the Power On Channel for the Set-Top, earlier in
this section.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears in the forefront.
Result: The General Settings tab appears in the forefront.
5.
Make sure the option for Power On Channel is not selected.
Result: When this field is not selected, subscribers cannot select the power on
Result: When this field is not selected, subscribers cannot select the power on
channel for their set-top. Instead, you must select the channel for the
subscriber.
6.
Select the Base Application tab to select the power on channel for all
subscribers.
Result: The Base Application tab appears in the forefront.
Result: The Base Application tab appears in the forefront.