Cisco Headend System Release 2.7 Manuale Di Manutenzione
Appendix A
Bootloader LED Error Codes
144
4024836 Rev D
Er.57
Disk read failure. The bootloader has received uncorrectable errors from the disk
drive. To recover, the bootloader attempts to overwrite the bad sectors. This
overwrite process was successful.
Er.58
Disk operation aborted.
Er.59
An error has been reported from the SATA PHY layer.
Er.5A
Disk addressing error.
Er.60
Basic disk storage format has been established.
Er.61
The bootloader attempted to format the disk, but it was not successful.
Er.62
The bootloader could not find a valid image in the bootable image list.
Er.63
One or more images in the bootable image list has an invalid header.
Er.64
The selected image is not bootable.
Er.65
Storage unavailable for Boot or Save operations.
Er.66
Image invalidated due to Seven-strikes.
Er.6F
Invalid module number.
Er.74
Tuner failure, invalid LO1 status.
Er.80
Failed to initialize USB hardware.
Displayed by Zstrap and Cstrap.
Displayed by Zstrap and Cstrap.
Er.91
Error programming NAND flash. You might receive this error if bad blocks have
reduced NAND storage to the point that there is not enough memory for the
image.
Er.FL
Unrecognized flash type. Displayed by BSTRAP.IMG (xA2, xA3, xA3p, or xG2
protocols).
Option board flash not found (if running from the main board flash), or flash
type not recognized. If you are running from the main board flash, make sure
that the Ethernet option board is properly installed. Displayed by
BSTRAP.IMG ("f" option with xA2, xA3, xA3p, or xG2 protocols).
EfL-
The universal bootstrap (BSTRAP.IMG) is initializing the Ethernet interface. If this
remains on the LED display indefinitely, there is a problem with the interface. Try
using USB or serial interfaces instead.
Displayed by BSTRAP.IMG.
Displayed by BSTRAP.IMG.
EfLd
The universal bootstrap (BSTRAP.IMG) is waiting for the host (PC) to respond to
its attempt to initiate a download over the Ethernet interface. This might indicate a
cabling problem or that the XLD terminated prematurely.
Displayed by BSTRAP.IMG.
Displayed by BSTRAP.IMG.
L
The hardware loader (Laruasia, Pangea, or Atlas) is downloading from the main
board serial port. Wait until you see this indicator on the display before starting
XLD to perform a 3-step load (xA3 or xA3p protocols).