Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guida All'Installazione
USRM Web Interface - Platform Components
4039132 Rev B
105
HaStandby - Primary Servers Page
The HaStandby - Primary Servers page configures the set of primary servers to be
supported by the standby.
supported by the standby.
Refer to HaPrimary - Network Config Page for an explanation of the high-
availability function.
availability function.
The following illustration shows the HaStandby - Primary Servers page.
Parameters
The following table explains the HaStandby - Primary Servers page parameters.
Parameter
Description
Server
Displays the sequential server number in the list.
ServerID
The IP address of the primary server.
AdminState
Sets the administrative state of the primary server, as
follows:
follows:
InService - Indicates the standby is connected to the
primary server.
primary server.
OutOfService - Indicates the primary is out of service
and the standby should not assume control for the
primary if it fails.
and the standby should not assume control for the
primary if it fails.
NotReady - Indicates that provisioning is not yet
complete.
complete.