Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guida All'Installazione
Adding and Deleting USRM Service Groups Using Configuration Files
4039132 Rev B
363
Example: For our QAMs_Stuttgart.txt example, you would type the following
command at the system prompt and press Enter:
command at the system prompt and press Enter:
cp QAMs_Stuttgart_sgDelete.txt QAMs_Stuttgart.txt
4 Select the Resource Manager - QAMs - QAM <QamName> - Output Ports page
(where <QamName> is the name of the specific QAM), and verify that the
Service Group ID has been removed.
Service Group ID has been removed.
Deleting the Service Group in Resource Manager
Perform the following steps to delete the service group in resource manager.
1 Select the ResourceManger - Software page.
2 In the ConfigFileUpdate field, enter "sgDelete_Servername.txt".
1 Select the ResourceManger - Software page.
2 In the ConfigFileUpdate field, enter "sgDelete_Servername.txt".
Note: Use your specific file name if different than our example. Don't include
quote marks.
quote marks.
3 Select "Read" in the ConfigFileUpdate field's drop-down list and then click
Commit Changes.
4 Refresh the navigation tree by either clicking the top-level USRM name or by
clicking the web browser's refresh button.
5 Select the Resource Manager - Service Groups:Config page and verify that the
service group has been deleted.