Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Guida Utente
Enabled - Use the Macrovision content protection process to
prevent subscribers from copying all events that this segment
processes.
processes.
Note: If you select Enabled, an informational window should open
that describes the licensing restrictions of the Macrovision protection
process.
that describes the licensing restrictions of the Macrovision protection
process.
Did the informational window open?
o
If yes, click OK.
o
If no, contact Cisco Services.
Disabled - Do not use Macrovision content protection.
Follow Package Definition - Not currently supported
CIT (constrained
image trigger) flag
image trigger) flag
Sets content protection on YPbPr (component) high-definition analog output
ports that receive this segment, appropriate for your system:
ports that receive this segment, appropriate for your system:
Clear - Allows high-definition analog outputs to display video at
full HD resolution.
Set - Cause high-definition analog outputs to reduce the
effective image resolution to less than 520,000 pixels.
Note: Setting the CIT flag may not change the actual resolution
displayed on a high-definition analog output. Instead, some DHCT
vendors may choose to apply bandwidth filtering to reduce the image
resolution.
displayed on a high-definition analog output. Instead, some DHCT
vendors may choose to apply bandwidth filtering to reduce the image
resolution.
9.
Click Save. The system saves the segment information in the DNCS database and closes the Set Up
Segment window. The Segment List (by Source) window updates to include the new segment
information. If you scroll through the list horizontally, you will see a yellow band that indicates when the
segment is scheduled to start and its duration.
information. If you scroll through the list horizontally, you will see a yellow band that indicates when the
segment is scheduled to start and its duration.
10.
Do you need to set up another unlimited segment for this service source?
If yes, repeat this procedure from step 7.
Important: When creating other segments from the same source, make certain that all
segments have the same levels of Macrovision CCI (if used); otherwise, the content protection
may not work as expected for these segments.
segments have the same levels of Macrovision CCI (if used); otherwise, the content protection
may not work as expected for these segments.
If no, click File > Close to close the Segment List (by Source) window and return to the
Source List window. Go to step 11.
11.
Click File > Close to close the Source List window and return to the DNCS Administrative Console.
12.
Your next step is to add the secure service segment to a package. Does a package already exist to
which you want to add this service segment?
If yes, go to
.
If no, go to
Page 1300