Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Guida Utente

Before you begin, make certain that you have the following software installed on your system:



GQAM software release 4.0 or later



DNCS SR 2.7/3.7/4.2 SP2 or later

You will also need the following information:



Your network map



The input ports that receive the multiplexed source (ASI inputs, Ethernet inputs, or both)



If a GbE port is used for multicasting, the destination multicast IP address (IP multicast address) for the

GQAM modulator



If a GbE port is used for unicasting, the destination UDP port number on the GQAM modulator that

receives the source



GQAM output port number that modulates the source onto the network

Note: All of this information should be recorded on your network map. However, if it is not, contact your system
administrator to obtain the information.



