Cisco DNCS System Release 2.8 3.8 4.3 Guida All'Installazione
Package Installation Tool
78-4003052-01 Rev G
5
Package Installation Tool
To install software, you need to use the package installation tool (install_pkg). This
section contains procedures you can follow to verify if you have the tool and to
obtain the tool, if necessary.
Verifying the Package Installation Tool
Before you install the application platform software, you need to verify whether the
package installation tool (install_pkg) exists on the DNCS.
1 Open an xterm window on the DNCS.
2 Type cd /usr/sbin and press Enter.
3 Type ls and press Enter.
4 Is install_pkg present on the DNCS?
1 Open an xterm window on the DNCS.
2 Type cd /usr/sbin and press Enter.
3 Type ls and press Enter.
4 Is install_pkg present on the DNCS?
If yes, you are finished with this procedure.
If no, you must obtain the install_pkg from the Cisco FTP site. Go to
Obtaining the Package Installation Tool, next in this document.
Obtaining the Package Installation Tool
1 Open an xterm window on the DNCS.
2 Type cd /export/home/dncs/download and press Enter. The
2 Type cd /export/home/dncs/download and press Enter. The
/export/home/dncs/download directory becomes the working directory.
Note: You might have to create this directory if it does not exist on your system.
Note: You might have to create this directory if it does not exist on your system.
3 Log on to the Cisco FTP server.
Notes:
The address of the server is ftp.sciatl.com or 192.133.243.133.
Note: The address for the Cisco FTP server is subject to change. If you are
Note: The address for the Cisco FTP server is subject to change. If you are
unable to reach the FTP server, please contact Cisco Services for the latest
address.
The username is anonymous.
The password is the e-mail address of the person logging on.
4 Choose one of the following options to navigate to the directory in which the file
is located:
If you are outside the firewall, type
cd ./pub/scicare/RELEASED/SR2.2Patches.
If you are inside the firewall, type
cd /external_pub/scicare/RELEASED/SR2.2Patches.
5 Type bin and press Enter. The system sets the ftp transfer mode to binary.