Cisco Cisco RF Gateway 1 Guida All'Installazione
4038589 Rev A
1
Overview
This document describes the Cisco RFGW-1 software version 5.1.x
broadcast simulcrypt operation, including integrated PowerKEY®
encryption, and NDS encryption. Broadcast sessions are setup using
DNCS 4.4.1 and the scrambling operation is controlled by a NDS EIS
operating in AC reference mode.
broadcast simulcrypt operation, including integrated PowerKEY®
encryption, and NDS encryption. Broadcast sessions are setup using
DNCS 4.4.1 and the scrambling operation is controlled by a NDS EIS
operating in AC reference mode.
Who Should Use This Document
This document is intended for authorized service personnel who have
experience working with the RFGW-1 or similar equipment. The
service personnel should have appropriate background and
knowledge to complete the procedures described in this document.
experience working with the RFGW-1 or similar equipment. The
service personnel should have appropriate background and
knowledge to complete the procedures described in this document.
Qualified Personnel
Only appropriately qualified and skilled personnel should attempt to
install, operate, maintain, and service this product.
install, operate, maintain, and service this product.
WARNING:
Allow only qualified and skilled personnel to install, operate,
maintain, and service this product. Otherwise, personal injury or
equipment damage may occur.
maintain, and service this product. Otherwise, personal injury or
equipment damage may occur.
Document Version
This is the first release of this guide.
1
Chapter 1
Introduction
In This Chapter
Software Enhancements ......................................................................... 2