Cisco Cisco StadiumVision Director Guida All'Installazione
© 2011 Cisco Systems, Inc. All rights reserved
Page 2 of 71
the power supply shuts down or latches off, a cycle of off for 15 seconds and on
for 1 second will reset the power supply.
for 1 second will reset the power supply.
Over-current Protection (OCP)
The power supply shuts down and latches off after an over-current condition
occurs. This latch is cleared by a power interruption.
occurs. This latch is cleared by a power interruption.
The power supply will not be damaged from power cycling.
Over-voltage Protection (OVP)
The power supply shuts down and latches off after an overvoltage condition
occurs. This latch is cleared by a power interruption.
occurs. This latch is cleared by a power interruption.
Over-temperature Protection (OTP)
The power supply is protected against over-temperature conditions caused by
the loss of fan cooling or excessive ambient temperature. In an OTP condition,
the power supply will shut down. When the power supply temperature drops to
the rated safety limit, the power supply restores power automatically.
the loss of fan cooling or excessive ambient temperature. In an OTP condition,
the power supply will shut down. When the power supply temperature drops to
the rated safety limit, the power supply restores power automatically.
Regulatory Compliance
For regulatory compliance and safety information, see the Cisco Regulatory
Compliance and Safety Information for the Cisco Application Deployment Engine
(ADE) 2130 and 2140 Series Appliance document that ships with the product
and is also available on
Compliance and Safety Information for the Cisco Application Deployment Engine
(ADE) 2130 and 2140 Series Appliance document that ships with the product
and is also available on