Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011-2013 Cisco Systems, Inc. All rights reserved.
Page 7 of 12
Configuring the Turn TVs Off Application
Before the Turn TVs Off application can be used, the Administrator must configure
which TVs it controls and the required information to enable email notification.
which TVs it controls and the required information to enable email notification.
Specifying Which TVs are Controlled
The Turn TVs Off custom application leverages the zones defined in Cisco
StadiumVision Director to determine which TVs are controlled. If you do not wish to
have certain TVs controlled by this application, such as those located in the back
offices, be sure that those TVs are in a separate zone.
StadiumVision Director to determine which TVs are controlled. If you do not wish to
have certain TVs controlled by this application, such as those located in the back
offices, be sure that those TVs are in a separate zone.
To configure which zones of TVs are controlled by the application:
1. Log into Cisco StadiumVision Director as the Administrator.
2. Select Turn TVs Off from the Cisco StadiumVision Director Main Menu.
Figure 1.
Cisco StadiumVision Director Main Menu in Release 2.3
3. (Release 2.3 only) The portlet application interface provides access to configure
and use the Turn TVs Off custom application.