Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2012 Cisco Systems, Inc. All rights reserved.
Page 21 of 103
TV Mount Kits
The type of TV mount kit you use depends upon the TV model/manufacturer and
the TV location (fixed, swing arm or tilting wall mount, or a ceiling mount). Chief
the TV location (fixed, swing arm or tilting wall mount, or a ceiling mount). Chief
®
Professional Mounting Solutions (
) offers a broad range of
universal and custom flat panel TV mounts that are fast and easy to install. Use the
Chief’s MountFinder Pro feature on their website to quickly find Chief product
information and compatible mounts for specific flat panel TVs.
Chief’s MountFinder Pro feature on their website to quickly find Chief product
information and compatible mounts for specific flat panel TVs.
DMP Power Options
Power over Ethernet (PoE) is the recommended option for powering the DMPs. If
you use PoE, ensure that the DMP is connected to a recommended IDF switch, as
prescribed in the Connected Stadium Design and Implementation Guide.
you use PoE, ensure that the DMP is connected to a recommended IDF switch, as
prescribed in the Connected Stadium Design and Implementation Guide.
Chose a switch that supports full 802.3AF power for the number of switch ports that
have been designated for DMPs.
have been designated for DMPs.
The following illustration shows options for providing power the DMP.
Figure 14.
DMP Power Options
UTP Cable Runs
The DMP connects to a Cisco Connected Stadium network via a UTP cable
connection from the Ethernet RJ-45 port on the rear panel. A minimum quality cable
of Category 5 or higher Unshielded Twisted Pair (UTP) should be used for DMP
connections with the total cable length not to exceed the IEEE recommended 100
connection from the Ethernet RJ-45 port on the rear panel. A minimum quality cable
of Category 5 or higher Unshielded Twisted Pair (UTP) should be used for DMP
connections with the total cable length not to exceed the IEEE recommended 100