Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2012 Cisco Systems, Inc. All rights reserved.
Page 80 of 103
At the end of their shift, the installer returns the bar code scanner to the supervisor.
The supervisor downloads the scanned data and formats it to be compatible with
the BAT TSV file format. Part of the data formatting involves aligning MAC address
and Location into two columns beside each other. The scanned timestamp can be
used to correlate the DMP MAC to the TV Location.
The supervisor downloads the scanned data and formats it to be compatible with
the BAT TSV file format. Part of the data formatting involves aligning MAC address
and Location into two columns beside each other. The scanned timestamp can be
used to correlate the DMP MAC to the TV Location.
Note: The MAC address bar code on the DMP is very small and is a challenge for
some bar code scanners. In particular smart phone based scanners that use the
CCD camera generally do not work well. The following is a list of sub-$200 bar code
scanners that have been tested and found to work.
some bar code scanners. In particular smart phone based scanners that use the
CCD camera generally do not work well. The following is a list of sub-$200 bar code
scanners that have been tested and found to work.
Here is an example of a printer that can print bar-coded TV labels:
6. Import the TSV into Cisco StadiumVision Director and verify the import results
match what was intended. If an error occurs during Import, an error report will be
generated. Open the report to see where the error occurred.
generated. Open the report to see where the error occurred.
Figure 56.
Download TSV Error Report