Cisco Cisco StadiumVision Mobile Streamer Manuale Di Manutenzione
© 2012 Cisco Systems, Inc. All rights reserved.
Page 56 of 103
network
<ip network> <netmask>
default-router
<default-router IP address>
24. Add the Option 60 line with this syntax:
option 60 ascii DMP4310
25. Add the Option 43 line with this syntax:
option 43 ascii http://<SV Director IP Address>:8080/StadiumVision/dmp_reg
For example, to configure Option 43 for Cisco DMP 4310 with the Cisco
StadiumVision Director IP address 10.50.1.27, add this line to the DHCP pool in the
Cisco IOS CLI:
StadiumVision Director IP address 10.50.1.27, add this line to the DHCP pool in the
Cisco IOS CLI:
option 43 ascii http://10.50.1.27:8080/StadiumVision/dmp_reg
Note: The Cisco IOS DHCP server is limited to one Option 43 for each DHCP pool,
so you can only configure a DHCP scope for a single device type. This should not
pose a problem since the recommendation is to use separate VLANs per service.
For example, Video VLAN for DMPs, Voice VLAN for IP phones, and Wireless
VLAN for APs.
so you can only configure a DHCP scope for a single device type. This should not
pose a problem since the recommendation is to use separate VLANs per service.
For example, Video VLAN for DMPs, Voice VLAN for IP phones, and Wireless
VLAN for APs.
Cisco IOS software documentation calls for the URL to be enclosed in double
quotes (“). In the case of Cisco StadiumVision this is not required because there are
not any spaces in the URL. Furthermore, a defect in certain versions of Cisco IOS
software causes the quotes to be treated as if they are part of the URL. Therefore,
the use of quotes is never recommended.
quotes (“). In the case of Cisco StadiumVision this is not required because there are
not any spaces in the URL. Furthermore, a defect in certain versions of Cisco IOS
software causes the quotes to be treated as if they are part of the URL. Therefore,
the use of quotes is never recommended.