Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 59 of 83
If an image number is selected that is greater than the images available in the
CUCM, the factory default image (Image 1) will be used.
CUCM, the factory default image (Image 1) will be used.
4. Click Apply.
It takes approximately 10 seconds for the background switch to take effect on a
single phone. Changes to multiple phones will be processed serially, e.g. when
choosing option „All‟. Note that the phone background change is visible on the
phone while it is occurring (one can see screen navigation as it occurs)
single phone. Changes to multiple phones will be processed serially, e.g. when
choosing option „All‟. Note that the phone background change is visible on the
phone while it is occurring (one can see screen navigation as it occurs)
30B
Adjusting IP Phone Timeout Values
When guests use the IP Phone for local TV control or ordering, if the IP Phone
receives no input from the guest for a given amount of time (is idle), it returns to the
home page. By default, the idle timeout is set to 30 seconds.
receives no input from the guest for a given amount of time (is idle), it returns to the
home page. By default, the idle timeout is set to 30 seconds.
To change the idle timeout:
1. On the Advanced Tools page of the Management Dashboard, click Registry.
2. Click Load to ensure that you are viewing the current settings.
3. Scroll through the Registry Data list to tvRefreshTime (to modify the idle timeout for
TV control) and to orderRefreshTime (to modify the idle timeout for ordering).
4. Click in the Value field beside each and enter the new idle timeout in seconds.
5. Click Apply.