Cisco Cisco StadiumVision Director Guida All'Installazione Rapida
Configuring Serial Commands for External Volume
Support
Support
User Roles
Administrator
When using the external volume strategy, you must configure RS-232 commands to
send to the TV to change the volume.
NOTE: Volume commands do not need to be configured when
internal volume strategy is used.
Cisco StadiumVision Director allows you to configure two types of volume controls:
l
Relative—Depends on the volume increments set in the TV, which vary from
model to model.
l
Absolute—Preferred method. Defines a number of increments that are used to
control the volume between the minimum and maximum volume levels.
o
For the Cisco DMP 4310G—This is configured in the VolumeCount command.
The default is 10.
In addition to the VolumeCount command, you need to configure a string for
each incremental Volumen command.
o
For the SV-4K—Absolute volume is configured only by the series of Volumen
commands only.
provides information about the serial commands used to configure the Relative
and Absolute types of external volume control.
© Cisco Systems, Inc. All rights reserved.
45 of 331