Cisco Cisco StadiumVision Mobile Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 37 of 94
Provisioning Workflow
Once a DMP is auto registered, SV Director may be configured to perform the
provisioning automatically or the operator may choose to perform it manually using
the SV Management Dashboard. The DMP provisioning workflow is as follows:
provisioning automatically or the operator may choose to perform it manually using
the SV Management Dashboard. The DMP provisioning workflow is as follows:
1. SV Director polls the DMP for specific MIB values.
2. The DMP will return the requested MIB variable settings to SV Director for
2. The DMP will return the requested MIB variable settings to SV Director for
evaluation.
3.
Upon determining the DMP‟s compliance, SV Director will execute the
required commands as needed to provision the DMP and place it into the
“Ready” state.
required commands as needed to provision the DMP and place it into the
“Ready” state.
4. After provisioning is complete, the DMP displays on the TV an installation
flash graphic along with the default video channel. This flash graphic shows
the state of completion of the DMP provisioning, DMP IP and MAC
addresses, default gateway, firmware version, and other pertinent
information.
the state of completion of the DMP provisioning, DMP IP and MAC
addresses, default gateway, firmware version, and other pertinent
information.
Note: SV Director only sends the provisioning commands to the DMP if the DMP
has not yet been provisioned in SV Director. StadiumVIsion Director performs a
check before executing each command.
has not yet been provisioned in SV Director. StadiumVIsion Director performs a
check before executing each command.
Figure 37.
Provisioning Process
Provisioning Functional Description
The DMP provisioning is performed by the Provision DMP operation in the SV
Director Management Dashboard. The Provision DMP operation is a collection of
Dashboard commands with additional specifications related to timeouts and retries.
This command is similar to a macro that is typically created to execute a set of
operations in sequence with dependency checking. That is, the commands will be
executed only if the previous command was successful.
Director Management Dashboard. The Provision DMP operation is a collection of
Dashboard commands with additional specifications related to timeouts and retries.
This command is similar to a macro that is typically created to execute a set of
operations in sequence with dependency checking. That is, the commands will be
executed only if the previous command was successful.