Cisco Cisco StadiumVision Director Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 55 of 94
2. For each desired input (1 through 4):
a. Select the InputxName command in the available list and click << to add it to
the configured list.
b. Select the InputxName command in the configured list and click + at the
upper right of the Serial Strings of Selected Commands. Enter the desired
label, such as HDMI or Composite, and press Enter This label that appear on
the Cisco IP Phone when the guest selects the Advanced option.
label, such as HDMI or Composite, and press Enter This label that appear on
the Cisco IP Phone when the guest selects the Advanced option.
c. Select the Inputx command in the available list and click << to add it to the
configured list.
d. Select the Inputx command in the configured list and click + at the upper
right of the Serial Strings of Selected Commands. Enter the appropriate RS-
232 command for that input, and press Enter.
232 command for that input, and press Enter.
3. If the TV has more available inputs:
a. Click + at the upper right of the Available Serial Commands box and add a
corresponding command called InputxName, where x is a number that
identifies the input.
identifies the input.
b. Select the InputxName command in the available list and click << to add it to
the configured list.
c. Select the InputxName command in the configured list and click + at the
upper right of the Serial Strings of Selected Commands. Enter the desired
label.
label.
d. Click + at the upper right of the Available Serial Commands box and add a
corresponding command called Inputx, where x is the number that identifies
the input .
the input .