Cisco Cisco StadiumVision Mobile Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 51 of 76
9. Select the desired Suites from the list. To select more than one Suite, press the
Ctrl key while selecting each Suite. To select a consecutive group of Suite, press
the Shift key and select the first and last desired Suite.
the Shift key and select the first and last desired Suite.
10. Click Add.
By default, when the channel guide is brought up on the IP Phone, it is also
displayed on the selected TV(s). You can change this behavior by setting the
“tvguide.autolaunch” parameter to 0 in the StadiumVision Director Management
Dashboard Registry.
displayed on the selected TV(s). You can change this behavior by setting the
“tvguide.autolaunch” parameter to 0 in the StadiumVision Director Management
Dashboard Registry.
Using
“Favorites” (Third-Party Touch Panels Only)
In addition to the channel lineup, a maximum of 10 channels can be identified as
favorites, which appear on the initial video control page of the third-party touch
panels.
favorites, which appear on the initial video control page of the third-party touch
panels.
For each channel that should be listed as a favorite:
In the Favorite field, select Yes.
In the Favorite Order field, enter a number (between 1 and 10) indicating the
ordinal placement of this channel in the listing,
Work with the third-party device integrator to determine how the favorites list should
be displayed on the third-party touch panels. All installations should move to access
channels directly versus indirectly through the favorites mechanism.
be displayed on the third-party touch panels. All installations should move to access
channels directly versus indirectly through the favorites mechanism.
Note: This feature will be removed in a future release.
Controlling the Behavior of the Channel Guide
The appearance and behavior of the channel guide are controlled by parameters in
the StadiumVision registry.
the StadiumVision registry.
The registry settings are as follows:
tvGuide.ChannelSelectFullScreen
This parameter controls whether the selected channel is displayed in full-screen
mode. The default is tvGuide.ChannelSelect FullScreen = 1.
mode. The default is tvGuide.ChannelSelect FullScreen = 1.
- If the tvGuide.ChannelSelectFullScreen = 1 and the guide is displayed on the
TV, then when a user selects a channel, the selected channel is displayed in
full-screen mode on the TV.
full-screen mode on the TV.
- If the tvGuide.ChannelSelectFullScreen = 0 and the guide is displayed on the
TV, then when a user selects a channel, the guide preview window will
change but the user must navigate away from the channel select page (by
moving to the Home Page, Display Select Page, Exit, etc.) for the selected
channel to be displayed in full-screen mode on the TV.
change but the user must navigate away from the channel select page (by
moving to the Home Page, Display Select Page, Exit, etc.) for the selected
channel to be displayed in full-screen mode on the TV.