Cisco Cisco StadiumVision Mobile Reporter Manuale Di Manutenzione
© 2011 Cisco Systems, Inc. All rights reserved.
Page 55 of 76
- Image 1 is the factory-default image (which cannot be customized.) Images 2
through 9 correspond to the order of the images in the List.xml file (which is
loaded into CUCM).
loaded into CUCM).
- The Image Number list always includes Image 1 through Image 9. The list
does not change even if there is only one image in CUCM, or there are more
than 9.
than 9.
- If an image number is selected that is greater than the images available in
the CUCM, the factory default image (Image 1) will be used.
4. Click Apply.
It takes approximately 10 seconds for the background switch to take effect on a
single phone. Changes to multiple phones can be processed in parallel, e.g. when
choosing option „All‟.
single phone. Changes to multiple phones can be processed in parallel, e.g. when
choosing option „All‟.
For more information about the Advanced Tools, see the StadiumVision Director
Management Dashboard User Guide.
Management Dashboard User Guide.
Adjusting IP Phone Timeout Values
When guests use the IP Phone for local TV control or ordering, if the IP Phone
receives no input from the guest for a given amount of time (is idle), it returns to the
home page. By default, the idle timeout is set to 30 seconds.
receives no input from the guest for a given amount of time (is idle), it returns to the
home page. By default, the idle timeout is set to 30 seconds.
To change the idle timeout:
1. On the Advanced Tools page of the Management Dashboard, click Registry.
2. Click Load to ensure that you are viewing the current settings.
3. Scroll through the Registry Data list to tvRefreshTime (to modify the idle timeout
for TV control) and to orderRefreshTime (to modify the idle timeout for ordering).
4. Click in the Value field beside each and enter the new idle timeout in seconds.
5. Click Apply.