Cisco Cisco 1 GHz GainMaker Amplifier Scheda Tecnica
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 6
The optional accessories listed in Table 8 may be ordered separately.
Table 8.
Optional Accessories
Optional Accessories
Part Number
24V Power Supply for Cisco GainMaker HGD
734771
230 VAC Crowbar Surge Protector (plug-in, one per station)
715973
Plug-in Inverse Equalizer: Simulates cable equivalent tilts (creates tilt opposite that of
equalizers). Use in place of forward input EQ as needed to maintain proper output tilt in
short spaced locations. Available in approx. 1.6 d
equalizers). Use in place of forward input EQ as needed to maintain proper output tilt in
short spaced locations. Available in approx. 1.6 d
B “cable equivalent” steps from 1.6 to
16.2 dB
4007486 (1.6 dB)
sequentially thru 4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder
Refer to the Cisco GainMaker Status
Monitoring Transponder Data Sheet.
Monitoring Transponder Data Sheet.
The housing options listed in Table 9 may be included with the product if ordered using the Cisco GainMaker
Ordering Matrix. They may also be ordered separately.
Table 9.
Housing Options
Cisco GainMaker System Amplifier Housing: 1 required housing includes housing base, lid, wiring
harness, and 24V power supply # 4022846. All housings have 15 amp capacity.
harness, and 24V power supply # 4022846. All housings have 15 amp capacity.
Part Number
● Uncoated 4-port housing without external test point access
4026387
● Chromate Plated 4-port housing without external test point access
4026388
● Uncoated 4-port housing with external test point access
4026385
● Chromate Plated 4-port housing with external test point access
4026386
Cisco GainMaker System Amplifier Housing Upgrade Kit: 1 required if upgrading an existing SA II,
II+, or III housing to allow use of Cisco GainMaker System Amplifier modules. Includes a Cisco GainMaker
System Amplifier housing lid, wiring harness, and 24V power supply # 4022846.
II+, or III housing to allow use of Cisco GainMaker System Amplifier modules. Includes a Cisco GainMaker
System Amplifier housing lid, wiring harness, and 24V power supply # 4022846.
● Uncoated 4 port housing lid without external test point access
4026389
● Painted 4 port housing lid without external test point access
4026390
● Uncoated 4 port housing lid with external test point access
4026391
● Painted 4 port housing lid with external test point access
4026392
Seizure Upgrade Kit: 1 required if upgrading an existing SAII or SAII+ housing base to allow use of Cisco
GainMaker System Amplifier Modules. Includes high current (15A) rated seizure screws and anvils.
GainMaker System Amplifier Modules. Includes high current (15A) rated seizure screws and anvils.
548775
Cisco Systems, Inc.
1 800 722-2009 or 678 277-1120
Printed in USA
C78-731154-01 08/14