Cisco Cisco 1 GHz GainMaker Amplifier Guida All'Installazione
Preparing for Forward Path Balancing
Position 2 - Selects manual setup mode
Position 3 - Selects AGC operational mode
Note: AGC operational mode is used only after the station has been initially balanced in
either thermal or manual setup mode.
Bode Network
The Bode Network, or Bode, is an interstage variable attenuation and slope network
whose loss characteristics are driven by DC control voltage.
The position of switch S1 sets the DC control voltage driving the Bode according to the
The position of switch S1 sets the DC control voltage driving the Bode according to the
setup mode or operational mode required for the station.
Refer to the following table for more information on choosing the correct switch position
Refer to the following table for more information on choosing the correct switch position
for your application.
Note: Consult your system technical supervisor or manager for more information about
which choice of setup mode to use, as this may be dictated by your system or corporate
engineering policy.
OL-31155-01
43