Cisco Netcrypt Bulk Encryptor Guida All'Installazione
Establish a Download Sequence
78-4024239-01 Rev B
19
3 If you have modulators that carry BFS sessions, download the software to the
BFS modulator first.
4 Continue downloading the software to modulators in this hub by working your
way up to the modulator carrying sessions that are most frequently viewed.
What’s Next?
xOD/VOD Sessions
If all of your modulators carry xOD or VOD sessions, you are ready to begin
If all of your modulators carry xOD or VOD sessions, you are ready to begin
downloading the new software to the modulators. Go to Download Software to the
GoQAM Modulators (on page 20).
Note: Because xOD and VOD sessions are not pre-configured, but they are set up as
Note: Because xOD and VOD sessions are not pre-configured, but they are set up as
needed when a subscriber requests them, generating a list of existing sessions is not
necessary.
Broadcast Sessions
If you have modulators that carry broadcast sessions, use Cisco's Report Writer to
If you have modulators that carry broadcast sessions, use Cisco's Report Writer to
view the Channels, Sources & Sessions Report. This report lists the existing
broadcast sessions in your system along with the channels and sources in your
system that each modulator currently carries.
The Channels, Sources & Sessions Report lists each display channel (channel number)
The Channels, Sources & Sessions Report lists each display channel (channel number)
in the system. The report also displays information about the carriage of each channel
(how the channel is transmitted on the DBDS). The report maps each source to the
transport device used to deliver the source (analog frequency on modulators).
Generating this report helps you to determine which sessions/services are carried by
Generating this report helps you to determine which sessions/services are carried by
each modulator. This report also helps you to verify that these sessions are
successfully rebuilt after the new software is downloaded to the modulator.
You can also use the DNCS Session List to determine the existing broadcast sessions
You can also use the DNCS Session List to determine the existing broadcast sessions
in your system.
Important: Refer to the DNCS Report Writer Version 3.5 User's Guide (part number
Important: Refer to the DNCS Report Writer Version 3.5 User's Guide (part number
734347) or the DNCS Online Help for your system for further assistance.