Cisco Cisco Prisma II EDR Receiver Guida All'Installazione
Chapter 3 Operation using ICIM
76
Table of Removed Modules
This table is named p2RemoveModuleTable. It contains a list of modules removed
since the last time the ICIM was reset or told to update the chassis ID for all
modules.
since the last time the ICIM was reset or told to update the chassis ID for all
modules.
The modules are displayed in chronological order, with the most recently removed
module always being in index position 1. If the number of modules removed exceeds
the capacity of the table, the oldest entries are deleted.
module always being in index position 1. If the number of modules removed exceeds
the capacity of the table, the oldest entries are deleted.
If a module is removed before the "plug-and-play" data is read in, the type, name,
and serial number are blank.
and serial number are blank.
Each row of this table is made up of the following variables:
Variable
Description
p2RemoveModuleIndex
The index for this table. The most recently removed
module is always in index position 1.
module is always in index position 1.
p2RemoveModuleChassisID
The chassis ID number of the removed module.
p2RemoveModuleSlotID
The slot ID number of the removed module.
p2RemoveModuleName
The name of the removed module. This is the name
from the plug-and-play data for this module, and
matches what the ICIM and SNMP display as the
name. LCI and your network management system may
use a different name.
from the plug-and-play data for this module, and
matches what the ICIM and SNMP display as the
name. LCI and your network management system may
use a different name.
p2RemoveModuleType
The type number of the removed module. This number
uniquely identifies every type of module.
uniquely identifies every type of module.
p2RemoveModuleSerialNum
The serial number of the removed module. This
information is needed to determine if a module has
been replaced with one that is the same type.
information is needed to determine if a module has
been replaced with one that is the same type.
Previous IP Address
This variable is named p2PreviousIP. When the IP of the ICIM is changed using the
front panel, this variable returns the previous ICIM IP address. It returns 0.0.0.0 until
the IP address of the ICIM is changed for the first time.
front panel, this variable returns the previous ICIM IP address. It returns 0.0.0.0 until
the IP address of the ICIM is changed for the first time.